Date | City | State | Employer | Body Part | Event |
---|---|---|---|---|---|
2021-11-10 | Quincy | Il | Michelmann Steel Construction Company | Shoulder(s), including clavicle(s), scapula(e) | Struck by object falling from vehicle or machinery-other than vehicle part |
On November 10, 2021, an employee was moving a 15-foot steel beam with an overhead crane. The beam begun to swing, fell, and struck the employee. The employee suffered chin and shoulder lacerations and a broken collarbone and was hospitalized. | |||||
2021-11-10 | Manchester | Nh | Northstar Steel & Aluminum, Inc. | Foot (feet) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was moving steel plates from a rack to a pallet for shipping. A set of three steel plates came unclamped from the overhead crane and crushed the employee's foot, resulting in multiple fractures and lacerations. | |||||
2021-11-08 | Jacksonville | Fl | Canam Steel Corporation | Thigh(s) | Struck by falling object or equipment, n.e.c. |
On November 8, 2021, an employee had finished dipping a bundle of steel joists in a paint tank and had set it to dry on top of a stack of bundles using a 10-ton overhead crane. While the employee was walking to get the overhead crane's hook to move the next bundle, the bundle he had just moved fell, causing him to become caught between the bundle and the paint tank. The employee suffered a broken left femur and was hospitalized. | |||||
2021-11-03 | Bedford Park | Il | M. D. Metals, Inc. | Finger(s), fingernail(s) | Contact with objects and equipment |
An employee was adjusting the hook and scale on an overhead crane when their thumb was crushed. | |||||
2021-11-01 | Fort Worth | Tx | Thornton Steel Company, LLC | Head and trunk | Other fall to lower level |
The injured employee was helping to unload metal tubes from a trailer. A co-worker was operating an overhead crane to lift a bundle of tubes. The load started to go sideways instead of in a straight line. As a result, the injured employee took a step backward and fell to the ground, sustaining two fractured ribs, a fractured right cheekbone, and a concussion. | |||||
2021-10-27 | Armorel | Ar | Paco Steel of Arkansas | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was using an overhead crane to load a steel coil onto a semi-truck when the employee's left little finger was caught between the coil and the crane's C-hook, resulting in a partial amputation. | |||||
2021-10-17 | Leetsdale | Pa | Libertas Copper, LLC | Lower leg(s) | Struck by falling object or equipment, n.e.c. |
An employee was attaching a C-hook to a smaller scale hook attached to an overhead crane. The C-hook was resting on top of a coil. The smaller scale hook was not fitting into the C-hook and the C-hook slid off of the coil, striking the employee's left shin and causing a laceration. | |||||
2021-10-11 | Saint Louis | Mo | Cauttrell Enterprises, Inc. | Leg(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was standing beside a stack of steel beams that had been lifted with an overhead crane. After trying to move the chain with the hook away from under the stack, the employee raised the crane. The chain hooked back onto the beams, causing them to fall onto the employee and to fracture both legs. | |||||
2021-10-05 | Fairfield | Al | United States Steel Corporation | Finger(s), fingernail(s) | Entangled in other object or equipment |
An employee was using a remote controlled overhead crane to position a steel chock measuring 3 feet by 2 feet onto a roll. The employee handled the crane remote with his right hand and the wire rope with his left hand when the wire rope caught his left thumb, resulting in an amputation. | |||||
2021-10-04 | Minocqua | Wi | Nimsgern Steel Corp. | Lower leg(s) | Struck, caught, or crushed in other collapsing structure or equipment |
An employee was unloading steel I-beams from a drill machine using an overhead crane when a stack of seven I-beams tipped over onto the employee, resulting in two broken legs below the knee that required hospitalization. | |||||
2021-10-01 | Miami | Fl | Covanta Dade Renewable Energy, LLC | Leg(s) | Caught in running equipment or machinery |
A crane operator was resetting a limit switch on an overhead crane. A cable and/or drum caught the operator's left leg, causing the operator to fall about 10 feet from the crane bridge. The employee's leg got entangled in the crane cables resulting in amputation of their left leg at the thigh. The employee was hospitalized. | |||||
2021-09-27 | Birmingham | Al | O'Neal Steel, LLC | Multiple face locations | Struck by swinging or slipping object, other than handheld, n.e.c. |
An employee was lifting steel plates with an overhead crane. The steel plates struck the employee in the face resulting in a broken jaw and fractured teeth. | |||||
2021-09-24 | Burgettstown | Pa | Union Electric Steel Corporation | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was preparing to lift a 25,000-pound forging with an overhead crane using a spreader bar and a set of chains. The chains on one side of the forging snagged on set downs and would not slide into position. The employee used his right hand to position the chains to the center of the load when the crane began to lift the forging. The employee's right middle finger was caught between the chain and the forging, resulting in amputation to the first knuckle. | |||||
2021-09-20 | Austinburg | Oh | Delta Railroad Construction Inc | Foot (feet) | Struck by object or equipment |
An employee was hooking up a metal buggy to an overhead crane. The metal buggy fell and crushed the employee's foot. The employee's was hospitalized, undergoing surgery. | |||||
2021-08-26 | Elmore | Oh | Materion Corp. | Finger(s), fingernail(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
A hoisted metal cover, about 3 feet by 3 feet, fell off the hook of an overhead crane that had been used to lift it. It landed on the left hand of an employee who was cleaning under it, and he suffered fractures and a partial amputation (below the nail) to the left middle finger. | |||||
2021-08-19 | Carrollton | Tx | Western Extrusions Corporation | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was moving metal billets onto a load table with an overhead crane. The employee's fingers were caught between two billets, causing the amputation of the right fourth and fifth fingers. | |||||
2021-08-13 | S Coffeyville | Ok | Star Pipe USA LLC | Lower leg(s) | Struck by object or equipment |
An employee was in the crow's nest of a charge deck operating an overhead crane to break foundry returns in a return pit. A section of gating exited the return pit and struck the employee's lower left leg, resulting in a compound fracture. | |||||
2021-08-05 | Schiller Park | Il | E.J. Basler Co. | Foot (feet) | Struck by object or equipment rolling freely |
An employee was moving a bundle of solid brass rods with an overhead crane. After being set on the floor, the bundle separated; rods rolled onto the employee's feet, crushing them. | |||||
2021-08-05 | Ferguson | Mo | Permalok Corporation | Chest, except internal location of diseases or disorders | Struck by swinging or slipping object, other than handheld, n.e.c. |
An employee was moving an aerial lift over a gantry crane track using an overhead crane. The employee was standing between a 74-inch steel pipe and the boom of the aerial lift when the final wheel of the lift cleared the gantry track and the boom swung over and pushed the employee into the pipe, resulting in fractured ribs and contusions on the left lung. | |||||
2021-07-26 | Scottdale | Pa | Duraloy Technologies, Inc. | Arm(s) | Struck by swinging or slipping object, other than handheld, n.e.c. |
An employee was using an overhead crane when its hook got caught on the bed of a hydraulic press. When the crane was being lowered, the hook slipped, struck the employee's left arm, and broke it. He was hospitalized, requiring surgery. | |||||
2021-07-21 | Henderson | Co | Liberty Oilfield Services | Chest, except internal location of diseases or disorders | Other fall to lower level 11 to 15 feet |
A mechanic was on top of the HHP in Bay 1 drilling out broken bolts. Another operator was running the overhead crane using a handheld remote, moving it from the south side of the HHP to the north side to pick up a fluid end. As the crane moved over the top of the HHP, it struck the mechanic, knocking him off the HHP onto the cement floor of the shop 13 feet below. The injured employee was hospitalized for broken ribs, a sprained wrist and stitches to the face. | |||||
2021-07-18 | Wausau | Wi | O'Brien Steel Service Co. | Fingertip(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee slipped a separator over the end of the beam and was using a 10-ton overhead crane to lift the beam. As the employee was placing a wood block in place, the separator slipped off the end of the beam, and the beam fell onto the employee's left index finger. The fingertip was amputated. | |||||
2021-06-30 | Seabrook | Nh | Will-Mor Manufacturing, Inc. | Finger(s), fingernail(s) | Struck by swinging or slipping object, other than handheld, n.e.c. |
An employee was setting up a CNC machine for machining metal, using an overhead crane to lower a template (angle iron) onto the machine table. As the employee was lowering the template, he noticed metal shavings on the table. He rested the edge of the template on the table while he cleaned it. When he started to lower the template again, his left hand was on the top of the template to guide it. The template slipped and swung forward catching his left hand between the edge of the machine and the | |||||
2021-06-29 | Jacksonville | Fl | Joseph T. Ryerson & Son, Inc. | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
On June 29, 2021, an employee was unloading materials from a flat bed truck using an overhead crane and a nylon sling. While positioning the nylon sling to hoist a stack of 6"x12' aluminum round bars that was on top of 5"x12' rectangular flat bars, the round bars shifted, rolled back, and pinned the employee's left middle finger between a round bar and a flat bar, resulting in a fingertip amputation. | |||||
2021-06-25 | Dickinson | Tx | Gulf Coast Pipeline Services | Lower leg(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was using a 15-ton overhead crane to move a large metal table weighing approximately 2,300 pounds. The table fell on his right leg resulting in a fractured lower leg. | |||||
2021-06-08 | Delta | Oh | North Star Bluescope Steel, LLC | BODY SYSTEMS | Exposure to environmental heat |
On June 8, 2021, after operating a remote-control overhead crane in a steel-making plant, an employee became ill, suffering from leg cramps. The employee was hospitalized, suffering from possible heat stress. | |||||
2021-05-21 | Martinsburg | Wv | Concrete Pipe & Precast | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
On May 21, 2021, an employee was using an overhead crane to lift a cured precast concrete piece. The employee had connected the crane's lifting hook to the lifting hook on the concrete piece. As the piece was lifted, the chain tightened and pinched the employee's right index fingertip. The fingertip was amputated. | |||||
2021-05-14 | Cleveland | Oh | Progress Rail - Cleveland Track Materials, Inc. | Foot (feet) | Struck by swinging or slipping object, other than handheld, n.e.c. |
On May 13, 2021, an employee was operating an overhead crane to move a 2,980 lbs. chip hopper. The hopper was approximately one inch off the ground while moving it. The hopper rotated and caught the employee's foot against the hopper frame and concert ramp resulting in a fracture and laceration to the foot. | |||||
2021-05-05 | Cincinnati | Oh | Xtek, Inc. | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was lifting a 400-pound spindle with an overhead crane. The load shifted and fell on his right hand, causing a partial amputation to the ring finger. | |||||
2021-04-28 | Lynchburg | Va | BWXT, Inc. Nuclear Operations Group-Lynchburg | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was repositioning an 800-pound component on a transfer cart using an overhead crane when the component shifted and caught the employee's left thumb and index finger between the component and the transfer cart. The employee's left thumb and index finger were crushed. | |||||
2021-04-23 | Brookville | Oh | Green Tokai Co. Ltd. | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was using an overhead crane to move a metal coil of steel from a machine and place it on a skid. The coil shifted while being set down and pinched the employee's left ring finger amputating the fingertip just below the nail bed. | |||||
2021-04-06 | Pensacola | Fl | Bell Steel Company Inc. | Foot (feet) and ankle(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
A temporary employee was moving a 2' x 20' steel beam weighting between 2500 & 3000 lbs. using an overhead crane. The employee sat the steel beam on stands with chains and lifted one end of the beam with the crane when a chain caught and pulled the beam off the stands. One end of the beam landed on the employee's left foot and ankle causing crushing injuries including broken bones that required hospitalization and surgery. | |||||
2021-04-05 | Houston | Tx | Powertherm Co., Inc. | Multiple body parts | Other fall to lower level 6 to 10 feet |
An employee was operating an overhead crane from a scissor lift. He was holding the object being lifted when the lifting hook caught his glove, causing the employee to fall 10 feet from the scissor lift and suffer fractures to his shoulder, hips, and knee. | |||||
2021-03-31 | Middletown | Oh | Metal Matic, Inc. | Fingertip(s) | Caught in running equipment or machinery |
At about 9:00 a.m. on March 31, 2021, an employee was using an overhead crane to pick up steel tubing to put it into a tube cutter machine. As the employee reached to remove a tag affixed to the tubing, his left middle fingertip was amputated by the guide gate of the tube cutter. | |||||
2021-03-29 | Toccoa | Ga | Patterson Pump Company | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
Employees were using an overhead crane to put a 500-pound water pump onto three V-shaped stands. The pump shifted, and an employee's right middle fingertip was amputated at the first knuckle by a hook from a strap on the pump and the stand. | |||||
2021-03-23 | Franklin Park | Il | Nelsen Steel and Wire Company, Incorporated | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was using an overhead crane to load a bundle of hexagonal bars onto the conveyor belt of a die bench machine. When the employee unstrapped the bundle, a hexagonal bar moved and crushed the tip of his left thumb against another bar resulting in a fingertip amputation. | |||||
2021-03-14 | Cullman | Al | Topre America Corporation | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was lifting a metal coil with an overhead crane. He noticed the chain sling was twisted and was trying to straighten it when his left index finger was pinched between the chain sling and the coil. The finger was broken. | |||||
2021-03-04 | Brookshire | Tx | Basden Industrial Group, LLC | Lower leg(s) | Compressed or pinched by shifting objects or equipment |
An employee was moving steel beams with an overhead crane. The beams shifted and pinned the employee's legs, breaking both of them. | |||||
2021-02-25 | Canonsburg | Pa | Pennsylvania Transformer Technology, Inc. | Lower leg(s) | Struck by falling object or equipment, n.e.c. |
An employee was moving a steel coil that was 4.5" in width and weighed 1,340 lbs. from where it was being stored to the machine using an overhead crane. As the employee was attempting to roll the steel coil out from where it was stored to attach it to the crane, it started to become off balance and tipped over, landing on the employee's legs. The employee was trapped under the steel coil and sustained a broken tibia and fibula that required surgery. | |||||
2021-02-24 | Montgomery | Al | Mobis Alabama, LLC | Chest, except internal location of diseases or disorders | Struck by swinging or slipping object, other than handheld, n.e.c. |
An employee was lifting and moving a 22-ton mold using a 50-ton overhead crane. The crane moved and the employee was caught between the suspended mold and another, stationary mold behind him. He suffered lacerations to the liver and spleen, a broken rib on the right side, and a collapsed right lung. | |||||
2021-02-24 | Midway | Fl | OldCastle Infrastructure, Inc | Finger(s), fingernail(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
On February 24, 2021, an employee was helping install a 250-pound metal pallet on a precast concrete form. The pallet became bound on the inner core of the form while an overhead crane was lowering it into place. The employee began moving dunnage below while the crane held the pallet about 12 inches above the ground. The pallet fell onto the employee's right ring and middle fingers, catching them against the dunnage and causing partial amputations to both fingers. | |||||
2021-01-30 | Chicago | Il | G. E. Mathis Company | Lower leg(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
On 1/30/2021, at 6:00 AM, an employee was operating an overhead crane to move steel plate material in the horizontal position. The crane was equipped with lifting devices including a spreader bar, chains, and plate clamps. The rigging failed and the steel plate fell on the employee's right ankle resulting in lower leg fractures. | |||||
2021-01-16 | Downingtown | Pa | FADDIS CONCRETE PRODUCTS | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was scraping concrete from a form. As he tried to lift a panel with an overhead crane, his finger was caught between the panel and the chain of the lift. The finger was crushed and the fingertip was fractured. The fingertip was later medically amputated. | |||||
2020-10-19 | West Allis | Wi | Toshiba America Energy Systems Corporation | Fingertip(s) | Caught in running equipment or machinery, n.e.c. |
Two employees were inspecting the hoist cable on an overhead crane. One employee was operating the crane while the injured employee inspected the hoist cable. The injured employee was feeling the cable while it was moving through his gloved right hand checking for burrs or distortion in the cable when his fingers were caught between the crane cable and the pully of the block. Two fingertips were amputated. | |||||
2020-10-13 | Walton Hills | Oh | NPK Construction Equipment Inc. | Toes(s), toenail(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was placing a steel plate back into a rack using a 10-ton overhead crane and a plate clamp. The plate fell, hitting the employee's left foot and amputating the big toe as well as part of the second toe. | |||||
2020-10-01 | Meriden | Ct | THE MILLER COMPANY | Chest, except internal location of diseases or disorders | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was using an overhead crane to remove coils from machinery. The coil of metal fell and struck the employee. The employee was hospitalized for broken ribs. | |||||
2020-09-30 | Pulaski | Pa | Young Galvanizing, Inc. | Leg(s) | Struck by falling object or equipment, n.e.c. |
Employees were using an overhead crane to submerge metal I-beams and girders in a galvanizing dip tank. Other I-beams and girders were stacked on the shop floor waiting to be processed. The stack was bumped, causing three I-beams/girders (weighing about 4,000 pounds in total) to fall off and strike an employee's leg. The employee was hospitalized with multiple leg fractures. | |||||
2020-08-31 | Janesville | Wi | Titan Reinforcing, LLC | Chest, except internal location of diseases or disorders | Other fall to lower level 11 to 15 feet |
On August 31, 2020, an iron worker was installing a steel wall curtain while attached to the steel wall curtain approximately 12 feet from the ground. The steel wall curtain was on an overhead crane and employees were making ties at certain points. When the steel wall curtain was released by the crane it overturned and the iron worker was either struck by the steel wall curtain and/or struck an air compressor that was on the ground where he fell. The employee was hospitalized for fractured ribs. | |||||
2020-08-28 | Chippewa Falls | Wi | Huffcutt Concrete LLC | Fingertip(s) | Caught in running equipment or machinery, n.e.c. |
On August 28, 2020, an employee was affixing the D-ring of a pallet lifting device to the sling hook of an overhead crane when the crane's hook was raised. The employee's left thumb was caught between the crane hook and the D-ring, and the thumb tip was amputated. | |||||
2020-08-25 | Houston | Tx | Tioga Pipe Supply Inc. | Hand(s) | Compressed or pinched by shifting objects or equipment |
An employee was offloading pipe using a 5-ton overhead crane. He was lowering a bundle that had been lifted off center and was using his left hand to level and balance the load when the chain sling slipped and his left hand was trapped between the chain and the pipe. He was hospitalized. | |||||
2020-08-21 | South Plainfield | Nj | Intsel Steel East | Finger(s), fingernail(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was preparing steel flats to be loaded using an overhead crane and a hook. He lifted the material about 4 inches up and attempted to put a block under the material with his right hand. The material slipped off the hook and came down on his right hand, crushing and amputating the index finger below the second knuckle. | |||||
2020-07-16 | York | Pennsylvania | KINSLEY CONSTRUCTION | Forearm(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was moving a flat bar/plate from a storage rack using an overhead crane equipped with a lifting magnet. The magnet detached from the plate and the plate struck the employee's left forearm as it fell to the ground. The employee sustained a severe laceration. | |||||
2020-07-14 | Houston | Texas | Bayou Processing and Storage LP | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was guiding an overhead crane C-hook into coils of sheet metal. His hand was on the back side of the C-hook when it struck another master coil. His finger was caught between the C-hook and the coil, resulting in a partial amputation of his right distal pinky finger. | |||||
2020-07-06 | Deland | Florida | Forterra Pipe And Precast, LLC | Ankle(s) | Fall on same level, n.e.c. |
On July 6, 2020, a mobile equipment operator was operating an overhead crane inside a building and felt light-headed. The employee then took a 15-minute break and drank a bottle of water. After the break the employee was standing and fell to the ground breaking his left ankle. The employee was hospitalized for heat exhaustion. | |||||
2020-07-02 | Buffalo | New York | FORD MOTOR COMPANY | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was installing a hydraulic cylinder onto a forklift using an overhead crane. While manually maneuvering the cylinder into place, the employee’s left thumb was pinched between the cylinder and the forklift carriage resulting an amputation up to the first knuckle. | |||||
2020-07-02 | Greenville | Pennsylvania | Diamond Steel Construction Co. | Foot (feet) | Struck by falling object or equipment, n.e.c. |
An employee approached an I-beam in order to start welding on it. The I-beam had been set on the ground with an overhead crane and unhooked from the rigging before the crane traveled away. The beam then rolled and landed on the employee's right foot. The employee sustained broken bones and deep lacerations to their right foot. The employee was hospitalized for surgery and wound cleaning. | |||||
2020-06-30 | Kaukauna | Wisconsin | Team Industries, Inc. | Foot (feet) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was using a paint brush to touch the side of a spool that another employee was loading onto a trailer using an overhead crane when the spool (12 feet long with a 12-inch diameter) caught another spool on the trailer. This caused the other spool, to fall off the trailer and strike the employee's left foot, fracturing it. | |||||
2020-06-19 | Wickliffe | Ohio | IWI Inc. | Nonclassifiable | Struck by falling object or equipment, n.e.c. |
An employee was prepping an overhead crane for painting. The crane slipped off the 2-foot tall stands it was sitting on and landed on the employee. The employee was hospitalized with a fracture below the clavicle. | |||||
2020-06-12 | Haltom City | Texas | Mica Steelworks | Foot (feet) | Struck by object or equipment, n.e.c. |
An employee was standing near a shaft while it was being moved with an overhead crane. The shaft bumped into another shaft which hit the employee's foot. His right foot was fractured. | |||||
2020-06-05 | Eutaw | Alabama | WestRock, Inc. | Fingertip(s) | Caught in or compressed by equipment or objects |
An employee was at a weld press printing station, performing a product change using an overhead crane. His left ring finger got caught between the lock collar and the gear sleeve, causing the amputation of the fingertip. | |||||
2020-06-04 | Adel | Georgia | Hornet Steel Buildings, Inc. | Thigh(s) | Struck by falling object or equipment, n.e.c. |
Two employees were using an overhead crane to lift a steel column that was interlocked with a second steel column. The columns were side-by-side standing on the floor. Employee 1 attached the lifting device to the second column. When Employee 2 lifted the second column it swung and caused the first column to fall over and land on top of Employee 2. Employee 2 suffered a broken left femur and lacerations to the right leg. | |||||
2020-05-28 | Chandler | Arizona | Arconic Inc. | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
Three pieces of metal, weighing approximately 250 pounds each, were being lifted using slings attached to an overhead crane. An employee was guiding the metal as it was lifted out of a rack. The metal pinched the employee’s finger against the rack resulting in the amputation of his right ring fingertip. | |||||
2020-05-23 | Mission | Texas | Rodco Steel Distributors | Forehead | Struck by object falling from vehicle or machinery-other than vehicle part |
Two employees were standing in a loading area and operating an overhead crane with a remote when a set of PBR aluminum steel sheets fell from the crane and landed on the employees. The first employee suffered a forehead laceration. The second employee suffered a broken right leg. | |||||
2020-04-27 | Elgin | Illinois | Hansen Plastics Corporation | Arm(s) | Contact with objects and equipment |
An employee was lifting a mold block using an overhead crane. The block broke the employee's left arm and crushed the employee's right arm and hand. | |||||
2020-04-20 | Fort Worth | Texas | DFW Movers and Erectors, Inc. | Leg(s) | Struck by falling object or equipment |
Employees were organizing iron beams with an overhead crane and sweeping the work area when the steel beam tipped over and pinned the injured employee's legs, causing fractures to both. | |||||
2020-04-17 | Oklahoma City | Oklahoma | Mid-Continent Rental Company | Chest, except internal location of diseases or disorders | Struck by falling object or equipment, n.e.c. |
An employee was attempting to position a power cylinder head into storage with an overhead crane. While placing the power cylinder in the bottom part of the rack, the rack shook and knocked off another power cylinder that struck the employee, who suffered broken ribs and a collapsed lung. | |||||
2020-04-15 | Loganville | Georgia | Superior Industries, Inc. - Fesco Division | Elbow(s) | Other fall to lower level |
An employee was using a metal grabber and overhead crane to assemble a chute out of various pieces of steel. The employee had positioned a sheet of steel in a vertical manner and then climbed onto an 8-foot step ladder to remove the metal grabber from the top of the sheet of steel. The metal grabber moved away from the employee, and the employee lost balance and fell to the floor, landing on the right side. The employee sustained a contusion to the right elbow. | |||||
2020-04-13 | Hattiesburg | Mississippi | Sofidel America | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was using an overhead crane to return a spent parent roll to a stand. The roll bounced and smashed his left middle and index fingers against the crane hook. Both fingers were crushed and cut, and the middle finger was amputated to the first knuckle. | |||||
2020-04-09 | Bridgeville | Pennsylvania | UNIVERSAL STAINLESS & ALLOY PRODUCTS, INC. | Finger(s), fingernail(s) | Caught in or compressed by equipment or objects, n.e.c. |
An employee was using an overhead crane to lower material onto a table. His left-hand fingers got caught between the material and the table. Four fingers were broken. | |||||
2020-03-29 | Hermitage | Pennsylvania | Miller Industries, Inc. | Finger(s), fingernail(s) | Struck by dislodged flying object, particle |
An employee had just moved the bed of a tow truck using a winch attached to an overhead crane. As he set the bed down on a cart, the winch detached, came back up toward the employee, and struck his left hand, pinching it against the crane hook. He suffered a partial amputation of the middle finger. | |||||
2020-03-19 | Seneca Falls | New York | ITT Goulds Pumps | Multiple body parts | Other fall to lower level 11 to 15 feet |
An employee was working from a 15-foot-high scissor lift, replacing lightbulbs along a ceiling. An overhead crane struck the scissor lift, causing it to tip over. Its basket fell onto a table on the floor, then ejected the employee; the employee suffered a broken elbow, a possibly broken arm, a broken collarbone, and a head injury. | |||||
2020-03-19 | Calvert | Alabama | AM/NS Calvert, LLC | Hand(s) | Direct exposure to electricity |
An employee was troubleshooting an overhead crane. A part in the electrical cabinet caused an arc flash that burned his right hand. He was hospitalized. | |||||
2020-03-19 | Oklahoma City | Oklahoma | Downing Wellhead Equipment LLC | Chest, except internal location of diseases or disorders | Struck against stationary object or equipment, n.e.c. |
A CNC part fell from an overhead crane sling. An employee jumped out of its way and struck a tool cabinet, suffering a broken rib. | |||||
2020-03-17 | Houston | Texas | Valmont Industries - United Galvanizing | Finger(s), fingernail(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was preparing to raise a steel frame using an overhead crane and chain sling. The tip of the crane hook was being used to raise the frame. After the frame was raised 6-12 inches from the floor, the employee went to position the chain and the frame fell onto his left hand. He sustained amputations to the middle, ring, and pinky fingers and was hospitalized. | |||||
2020-03-10 | Flowood | Mississippi | Rockett, Inc. | Foot (feet) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was using an overhead crane to move a rack upright. The 200-pound rack fell from the crane and crushed the employee's left foot. | |||||
2020-03-06 | New Castle | Pennsylvania | Faddis Concrete Products | Hand(s) | Struck by swinging or slipping object, other than handheld, n.e.c. |
A temporary employee utilized an overhead crane to move a concrete panel from one area to another. The panel started moving towards a post. The employee put his hand on the concrete panel to stop it before hitting the post, but his left hand was caught between the panel and the post. The employee sustained a crushing injury to the left hand and was hospitalized for surgery. | |||||
2020-02-26 | Fraziers Bottom | West Virgini | FLSmidth Inc. | Multiple head locations | Struck by swinging or slipping object, other than handheld, n.e.c. |
An employee was lifting a metal plate with an overhead crane and a magnet. The plate or the magnet shifted and struck the employee's chin. The employee sustained a fracture and laceration to the chin and a concussion. | |||||
2020-02-21 | Lithia Springs | Georgia | NCI Group, Inc | Leg(s) | Struck by falling object or equipment |
An employee was operating an overhead crane to move a coil to a staging rack. After setting the coil down next to another coil, the employee did not move the chain, which was caught between the two coils. When the employee went to move the crane with the lodged chain, the coil became unstable and began to fall. The employee stepped out onto the staging rack to stabilize the coil with his hands. The coil was too heavy and fell onto the rack and the employee's right and left legs. As a result, the | |||||
2020-02-20 | Blytheville | Arkansas | LEXICON, INC. DBA SCHUECK STEEL | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee and a coworker were completing a roll change at the caster runout. They had already removed the old roll and were putting the new roll into final position. The roll was supported by an overhead crane. The coworker on the west end of the roll was providing hand signals to the crane operator in the cab. The injured employee was on the east end of the roll trying to guide the bolts into the bolt holes. The injured employee's finger was caught between the flange of the bearing housing an | |||||
2020-02-14 | Brownsville | Texas | Keppel AmFELS, L.L.C. | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
Three employees were moving steel plates using an overhead crane. One employee's left little finger was caught between the ring of the lifting clamp and the hook of the crane chain, causing an amputation of the fingertip. | |||||
2020-02-05 | Birmingham | Alabama | O'Neal Steel, LLC | Leg(s) | Struck by falling object or equipment |
An employee was using an overhead crane to put a piece of metal scrap in a dumpster. A stack of beams turned over and pinned the employee, injuring the employee's legs. The employee was hospitalized. | |||||
2020-01-22 | Shreveport | Louisiana | Alloy Piping Products, LLC | Foot (feet) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was operating an overhead crane. While he was hoisting the crane, the block contacted the upper limit switch. The switch was set off but did not stop the crane's movement, causing the crane's cable to snap. When the cable snapped, the crane block (weighing 91 lbs.) and chain (weighing 43 lbs.) fell 18 feet and hit the employee. He was hospitalized with a broken right foot. | |||||
2020-01-18 | Norfolk | Nebraska | King Steel Corporation | Pelvic region | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was moving a steel bundle with an overhead crane when the wrong button was depressed on the overhead crane controls, causing the steel load to crush him. He suffered a fractured hip or pelvis. | |||||
2020-01-15 | Waco | Texas | AAFES Waco Distribution Center | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was operating an overhead crane to lift a forklift battery for cleaning when his left middle finger was caught in the crane clamp, resulting in a left middle fingertip amputation. | |||||
2020-01-07 | Grovetown | Georgia | GIW Minerals, Inc. | Hip(s) | Struck by swinging or slipping object, other than handheld, n.e.c. |
An employee was lifting a part with an overhead crane when the part dislodged from the rigging system and moved toward the employee and fractured the employee's hip. The employee was hospitalized. | |||||
2019-09-19 | Milwaukee | Wisconsin | BHP, Inc. | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
On September 19, 2019, an employee was guiding a piece of product being lifted by an overhead crane. The employee's hand was crushed between two pieces of product; the employee suffered a broken finger and needed stitches. | |||||
2019-09-13 | Wallingford | Connecticut | Infra-Metals, Company | Lower leg(s) | Struck by swinging or slipping object, other than handheld, n.e.c. |
On September 13, 2019, at approximately 10:10 p.m., the injured employee offered to help a second employee load three pieces of 20-foot angle onto a trailer using an overhead crane. During the lift, two of the angles became stuck together. The injured employee asked the second employee to further raise the south hoist. As the second employee lifted the angle, the injured employee attempted to release the raised angle from the adjacent angle. When the angles released, the angle being raised relea | |||||
2019-09-06 | Claremore | Oklahoma | AXH AIR COOLERS | Back, including spine, spinal cord | Fall from collapsing structure or equipment 26 to 30 feet |
At 7:27 AM, two maintenance workers were working in an aerial lift that was 27 feet off of ground. They were servicing an overhead crane. Another overhead crane ran into the aerial lift, tipping it over. The two maintenance workers were hospitalized with fractures to their backs and other injuries. | |||||
2019-09-05 | Irvine | Pennsylvania | Ellwood National Forge | Eye(s) | Struck by swinging or slipping object, other than handheld, n.e.c. |
An employee moved a forging from the layout table to the centering machine using an overhead crane. The employee removed the crane’s hook from the forging and then moved the crane away from the area. As the crane was moving away, the hook got caught on the centering machine. The hook came under tension and then let loose, striking the employee on the right side of his head. The employee sustained a fractured orbital bone and eye damage. | |||||
2019-08-27 | Longview | Texas | Trinity Tank Car | Jaw, chin | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was using an overhead crane with a hoist to lift steel band material when the lifting device experienced tension from the overhead crane and slipped from the steel band. The steel band then struck and fractured his chin. | |||||
2019-08-22 | Palm Bay | Florida | L3 Harris Technologies, Inc. | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
A metal vibe plate was being lifted off a truss plate by an overhead crane. As an employee was removing two bolts on the end of the plate, the employee's left little finger was crushed between the plates. The tip was amputated. | |||||
2019-08-19 | Saint Louis | Missouri | BOEING | Fingertip(s) | Struck by swinging or slipping object, other than handheld, n.e.c. |
An employee was operating an overhead crane to lift a stabilizer from a test fixture. The stabilizer shifted and one end swung upward towards the injured employee, contacting his left forearm and trapping his thumb between the stabilizer and the crane remote sitting on top of the test fixture. He was able to use his other hand to raise up the stabilizer and release his hand. His left thumb tip was amputated. | |||||
2019-08-12 | La Place | Louisiana | BD LaPlace, LLC | Pelvis | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was removing a tundish with a remote overhead crane when the tundish fell off the crane and struck another employee against a second tundish on the floor. The injured employee suffered a broken pelvis. | |||||
2019-08-02 | Cedar Hill | Texas | Delta Steel Inc. | Leg(s) | Struck, caught, or crushed in other collapsing structure or equipment |
An overhead crane was being used to stack 4-by-4-by-20-foot steel beams on an existing pile of beams. An employee was walking through the area when a stack of about 20 beams from the pile collapsed and struck the employee's legs, breaking both of them. | |||||
2019-08-02 | Ambridge | Pennsylvania | O'Neal Manufacturing | Leg(s) | Other fall to lower level less than 6 feet |
A machine operator was moving a 4,200-pound steel plate into position onto an oxy burning table, about 2.5 feet above the floor. The employee was on the table, moving the plate into position using an overhead crane and a bar walker magnet, when the plate got hung up. It then popped up, shifted, and struck the employee in the leg. He fell off the table and suffered a compound fracture to the left leg. | |||||
2019-07-31 | Lubbock | Texas | Custom Pipe & Fabrication Inc. | Finger(s), fingernail(s) | Caught in or compressed by equipment or objects |
An employee was using an overhead crane to pick up a discharge head. His right hand was caught between the lifting apparatus and the discharge head; his right thumb was crushed and bone was broken. | |||||
2019-07-31 | Latrobe | Pennsylvania | Lehigh Specialty Melting, Inc. | Chest, except internal location of diseases or disorders | Other fall to lower level 6 to 10 feet |
An employee was rigging up a mold to an overhead crane. He fell into the mold storage pit, landing 7 feet below, losing consciousness, and suffering a broken rib. He was hospitalized. | |||||
2019-07-23 | Dallas | Texas | Pinnacle Marble & Granite, Inc. | Toes(s), toenail(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was helping to move a granite slab onto the photograph station using an overhead crane with a clamp attachment. The clamp holding the slab lost its grip and the slab fell, causing crushing injuries to the employee's right foot and the amputation of all the toes. | |||||
2019-07-20 | Columbus | Nebraska | Behlen Manufacturing Company | Multiple body parts | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was loading angle iron onto a trough which was attached to an overhead crane. The trough became disconnected from the overhead crane and it fell along with the angle iron, striking the employee. She sustained fractures to the tibia, six ribs, and multiple vertebrae. | |||||
2019-07-15 | Corrigan | Texas | Corrigan OSB, L.L.C | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
Employees were using an overhead crane to move logs. One employee was controlling the crane with a remote control. Another employee had his right hand on top of the hoist block when the block was raised. The employee's index finger was caught between the block and a pipe resulting in a partial amputation of the right index finger. |